Roll roofing offers an affordable and efficient solution for flat or low-slope roofs. Its simplicity makes it suitable for DIY enthusiasts and professionals alike. Rainstoppers Roofing in Charleston, WV, specializes in cost-effective roofing installations, including roll roofing. Here’s a step-by-step guide to ensure a successful installation.

Pre-Installation Preparations

Safety First

Wear gloves, safety goggles, and non-slip footwear. Ensure your workspace is safe and free from hazards.

Roof Inspection

Examine the roof for structural issues, leaks, or damage. Address these problems before starting the installation.

Gather Materials

You’ll need:

  • Roll roofing material
  • Roofing nails
  • Roofing cement
  • Utility knife
  • Measuring tape
  • Trowel
  • Hammer

Installation Methods

1. Asphalt Roll Roofing Installation

  • Clean the Roof Surface: Remove dirt and debris to ensure better adhesion.
  • Measure and Cut the Roofing: Allow for a 6–8 inch overhang on all edges.
  • Apply Roofing Cement: Spread cement along the roof’s edges to secure the roofing.
  • Roll Out the Material: Align it carefully and press firmly into place.
  • Nail the Roofing: Space nails about 12 inches apart along the edges.
  • Seal the Seams: Use roofing cement on seams and nail heads to create a watertight seal.

2. Self-Adhesive Roll Roofing

  • Prepare the Roof: Ensure it is clean, dry, and smooth.
  • Peel and Stick: Remove the backing and press the material onto the roof surface.
  • Overlap Seams: Overlap by a few inches for added water resistance.
  • Seal Edges: Run your fingers along the edges to secure the material.

3. Mineral-Surfaced Roll Roofing

  • Prepare and Measure: Follow the same preparation and measurement steps.
  • Nail the Material: Secure using roofing nails, starting from one edge.
  • Overlap and Seal: Overlap seams by a few inches and seal with roofing cement.

Cost of Roll Roofing Installation

Roll roofing materials cost between $30 and $100 per roll, depending on the type and brand. Labor costs vary by region and project complexity. For accurate pricing, request quotes from local contractors.

Advantages of Roll Roofing

FAQs

Can roll roofing be used on flat roofs?

Yes, roll roofing is suitable for flat or low-slope roofs. Proper installation ensures adequate water drainage and prevents pooling.

How much does roll roofing installation cost?

Costs depend on roof size, material type, and labor rates. Expect to spend $30–$100 per roll, plus labor.

Is self-adhesive roll roofing durable?

Self-adhesive roll roofing offers excellent durability when installed correctly, making it a convenient choice for quick installations.To understand roof installation costs with a guide for homeowners, click here.

If you are looking for the most professional, responsive, and honest roofing contractor in Ohio and West Virginia, look no further.

Contact Us